Parts I have heard about but never actually seen..
Close

Parts I have heard about but never actually seen..

This is a discussion on Parts I have heard about but never actually seen.. within the General forums, part of the Caferacer.net Forums category; http://cgi.ebay.com/ebaymotors/NOS-H...item45fc1e833c Seen plenty of SOHC police bikes, never a DOHC http://cgi.ebay.com/ebaymotors/Honda...item27bd68181a haven't seen one of these in an age, and even then it was a ...

Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Senior Member Geeto67's Avatar
    Join Date
    Oct 2005
    Location
    Columbus, Ohio
    Posts
    23,269

    Parts I have heard about but never actually seen..

    http://cgi.ebay.com/ebaymotors/NOS-H...item45fc1e833c






    Seen plenty of SOHC police bikes, never a DOHC
    http://cgi.ebay.com/ebaymotors/Honda...item27bd68181a






    haven't seen one of these in an age, and even then it was a different face:

    http://cgi.ebay.com/ebaymotors/Honda...item19beb6af41





    $1500, must not be that rare....

    http://cgi.ebay.com/ebaymotors/Harle...item27bd90f123



    Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better.
    - Samuel Beckett
    A tool is just an opportunity with a handle
    - Kevin Kelly

  2. #2
    Senior Member santa_ana's Avatar
    Join Date
    Jul 2010
    Location
    Fuengirola, Andalucia, Spain.
    Posts
    424
    Just picked up a Dellorto UB 20 with 12 degree floatbowl. When I looked, in the UK and Germany there weren't any under let's say 200€. Was looking for a 18mm scooter carb the other day and found said UB for 69€. Mysterious FleaBay. Whatever, I'm happy.

    Chris

  3. #3
    Senior Member santa_ana's Avatar
    Join Date
    Jul 2010
    Location
    Fuengirola, Andalucia, Spain.
    Posts
    424
    Just picked up a Dellorto UB 20 with 12 degree floatbowl. When I looked, in the UK and Germany there weren't any under let's say 200€. Was looking for a 18mm scooter carb the other day and found said UB for 69€. Mysterious FleaBay. Whatever, I'm happy.

    Chris

  4. Remove Advertisements
    CafeRacer.net
    Advertisements
     

  5. #4
    Senior Member Diamondj's Avatar
    Join Date
    Jan 2007
    Location
    Wharton, NJ, USA.
    Posts
    1,731
    quote:Originally posted by Geeto67

    http://cgi.ebay.com/ebaymotors/NOS-H...item45fc1e833c
    I saw a couple of the CB350 sets with the "tie dye" paintwork on them at Mid-Ohio. There was a loose blue and white side cover I looked at and I was amazed to see the colors appear to be molded in rather than painted on?

    Jim

  6. #5
    Senior Member Diamondj's Avatar
    Join Date
    Jan 2007
    Location
    Wharton, NJ, USA.
    Posts
    1,731
    quote:Originally posted by Geeto67

    http://cgi.ebay.com/ebaymotors/NOS-H...item45fc1e833c
    I saw a couple of the CB350 sets with the "tie dye" paintwork on them at Mid-Ohio. There was a loose blue and white side cover I looked at and I was amazed to see the colors appear to be molded in rather than painted on?

    Jim

  7. #6
    Senior Member JackC's Avatar
    Join Date
    Oct 2006
    Location
    Oneonta, NY, USA.
    Posts
    3,430
    quote:Originally posted by santa_ana

    Just picked up a Dellorto UB 20 with 12 degree floatbowl. When I looked, in the UK and Germany there weren't any under let's say 200€. Was looking for a 18mm scooter carb the other day and found said UB for 69€. Mysterious FleaBay. Whatever, I'm happy.

    Chris
    I had a very hard time finding a UA 19s carb. Finally found one on ebay canada, located in FRANCE. I think I only paid about $120 for it, plus 50 shipping. The ad was in French, which I don't speak, so it was a bit rougher than I expected.

  8. #7
    Senior Member JackC's Avatar
    Join Date
    Oct 2006
    Location
    Oneonta, NY, USA.
    Posts
    3,430
    quote:Originally posted by santa_ana

    Just picked up a Dellorto UB 20 with 12 degree floatbowl. When I looked, in the UK and Germany there weren't any under let's say 200€. Was looking for a 18mm scooter carb the other day and found said UB for 69€. Mysterious FleaBay. Whatever, I'm happy.

    Chris
    I had a very hard time finding a UA 19s carb. Finally found one on ebay canada, located in FRANCE. I think I only paid about $120 for it, plus 50 shipping. The ad was in French, which I don't speak, so it was a bit rougher than I expected.

  9. #8
    Senior Member Geeto67's Avatar
    Join Date
    Oct 2005
    Location
    Columbus, Ohio
    Posts
    23,269
    quote:Originally posted by Diamondj

    quote:Originally posted by Geeto67

    http://cgi.ebay.com/ebaymotors/NOS-H...item45fc1e833c
    I saw a couple of the CB350 sets with the "tie dye" paintwork on them at Mid-Ohio. There was a loose blue and white side cover I looked at and I was amazed to see the colors appear to be molded in rather than painted on?

    Jim
    yup molded in the plastic. I have always heard of tie dye sets but I have never actually seen one.....check that I saw one side cover for the 350 once but it broken. There is supposed to be a 750 tie dye set as well.
    Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better.
    - Samuel Beckett
    A tool is just an opportunity with a handle
    - Kevin Kelly

  10. #9
    Senior Member Geeto67's Avatar
    Join Date
    Oct 2005
    Location
    Columbus, Ohio
    Posts
    23,269
    quote:Originally posted by Diamondj

    quote:Originally posted by Geeto67

    http://cgi.ebay.com/ebaymotors/NOS-H...item45fc1e833c
    I saw a couple of the CB350 sets with the "tie dye" paintwork on them at Mid-Ohio. There was a loose blue and white side cover I looked at and I was amazed to see the colors appear to be molded in rather than painted on?

    Jim
    yup molded in the plastic. I have always heard of tie dye sets but I have never actually seen one.....check that I saw one side cover for the 350 once but it broken. There is supposed to be a 750 tie dye set as well.
    Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better.
    - Samuel Beckett
    A tool is just an opportunity with a handle
    - Kevin Kelly

  11. #10
    Senior Member Geeto67's Avatar
    Join Date
    Oct 2005
    Location
    Columbus, Ohio
    Posts
    23,269
    the 450 one is all paint because the tank and sidecovers are metal.
    Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better.
    - Samuel Beckett
    A tool is just an opportunity with a handle
    - Kevin Kelly

Page 1 of 2 12 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Has Anyone Heard Of This
    By Eric750 in forum General
    Replies: 1
    Last Post: 08-11-2009, 10:29 PM
  2. Anybody ever heard of this place?
    By Chip in forum General
    Replies: 20
    Last Post: 01-15-2009, 01:49 PM
  3. probably heard this before...
    By chello in forum General
    Replies: 81
    Last Post: 08-09-2008, 10:45 AM
  4. Anybody heard abou this?
    By Donald in forum General
    Replies: 1
    Last Post: 09-27-2004, 12:05 PM
  5. heard of this shop?
    By sule in forum General
    Replies: 0
    Last Post: 08-04-2004, 03:14 AM