Photo 8 of 8 from 1972 Suzuki GT550 build
thw gsx750f swingarm gave me 4 inches length and it needed to be cut narrower at the front, then i had to cut the spacer inside along with order narrower needle bearings, so i had to pull about 5 mm off each side 10mm off the spacer and add 5mm narrower bearings to each side. After that he original dust shields and washers were a perfect fit.
- Photo Added
- 03-03-2016, 02:13 PM
- 1972 Suzuki GT550 build
- Added by