front brake pads: tight fit on disc
ok, so here's what I'm running into:
the previous owner of my Z1 added a second front disc brake. When I bought the bike, the front brakes were frozen so I took them apart and rebuilt them as well as installing new pads. The calipers now brake perfectly fine. The thing is, the pads are rubbing against the discs even when no brake is applied, causing the front wheel to not spin freely.
Any thoughts on how to rectify the problem? should I sand down the pads or ride it until the pads wear down? or should I take the calipers apart again and see if I missed something?
Any help would be appreciated.