Wiring an Ignition Switch
Ok I am rewiring my dad's bike. Its a '77 XS650. It came with a different ignition switch on it and from the old hacked together harness I can't figure out how to wire it.
It has one black, one red, one brown with a white stripe, and one brown wire that come out of it. It also has three key positions.
I took my multimeter to it to find which circuits were completed and when.
Position #1: no closed circuits
Position #2: the black and red make a closed circuit and the brown with white stripe and the brown make a circuit.
Position #3: the red and the brown make a closed circuit
Ok so the cut down wiring schematic I am using shows one wiring going to the battery through the main fuse. One wire goes to both coils through the kill switch. Then there are two wires that are hooked together and go to the lights and the regulator.
Any help will be greatly appreciated.