Cafe Racer Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Technical
    Think this is my biggest change of getting a solution on my problem. First of all, I have a CB350 twin from 1969. I about to swap the fork on the 350 to a fork from a CB500 to get the front disc brake setup. On this 18" rim I know I can fit a 4.00 Firestone Vintage tire (have that setup on my...
  2. Technical
    I'm buildingba 74 cb350 four and wanted to push the rear back a bit, around a couple inches. I was somewhat curious as to if any longer singarms will bolt up, or if there are any that with minimal modification will work and hiw to go about those modifications. Thanks in advance!
  3. Project Builds
    Hello everyone i've recently picked up an 82 cb750 with 2008 R1 forks and swingarm (full font end and rear end to be exact) and I'm going to make it work. I've already chopped the "subframe" section off and have done some mock-up as well as ordering a 75' gas tank off eBay. I know it is going to...
  4. Technical
    So earlier this year I decided to build a vintage bike for speed week 2015. I am finishing work on the frame, and all the carbon composite bits and pieces. I am down to the swingarm and am having a bit of trouble finding a suitable extension kit or viable swap for the bike. I plan on pushing the...
  5. Technical
    I am as new as one can be to building a cafe racer. One thing I was wondering is, is there a good way to put a newer sportbikes swingarm on a CB550? I was hoping one would be a fairly easy swap so that I could use a wider tire than comes on the CB550. Any help would be great :)
1-5 of 5 Results