Cafe Racer Forum banner

73 CB500 - My clunky bars array...

733 Views 1 Reply 2 Participants Last post by  Nick
Hey there everyone,

I got some nice clubman bars on the bike (73 CB500) but the stock brake master cylinder and signal controls look Really Large and clunky. They are also in very crummy shape and I am looking for replacements.

Has anyone an alternative to OEM replacements for them?

Thanks for any leads or suggestions!

-David in Houston
1 - 1 of 2 Posts
Your best bet is to go to a cycle salvage yard. Find something that you like the looks of, and see if the lines match up. You can use just about anything as long as you don't mind doing a little splicing (for the electrics). There are also some generic aftermarket master cylinders and switches available through catalogs like Dennis Kirk. Use your imagination.
Good luck and happy hunting!

Goes like the proverbial violated primate....
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.