Cafe Racer Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
I have to replace the vaccume bag on the right carb, where can I order this part? I have been all over the internet and havn't found anything
 

·
Registered
Joined
·
12 Posts
Discussion Starter #2
Its the diaphram needs replaced! NEED ANSWER NOW! HAVE to have bike running by friday
 

·
Registered
Joined
·
422 Posts
By the end of the week I would look for a local cycle salvage yard and see if you can get a spare set with good parts to scavenge, spares are always good. New? Call local Yamaha Dealers always an outside chance they might have one, or Google, possibly pay a prime for shipping and you could have it by mid-week.
 

·
Registered
Joined
·
1,763 Posts
Is it beyond repair? A little rubber cement is your friend for small tears. If that's not possible, read on.

Options:
1. Search part no. "CW007-770SD" at http://www.cyclewareables.com/pages/mikuni_slide_diaphraghms/mikuni_slie_diaphragms.htm ($138)
2. Have it re-rubbered: http://www.motorcyclecarbs.com/_P15676.cfm
3. http://www.sudco.com/images/p150.jpg lists part numbers and model interchangeability for your carbs.

This took all of 15 minutes and Google. I've never even seen an XS1100. Try harder next time.
 

·
Registered
Joined
·
546 Posts
k&l has xs1100listed but you will have to ck to see if it covers your machine.. i have been rebuilding some unavailable slide assemblies with diaphragms from k&l as they sell about 10 to 12 different ones which cover a lot of makes and models.. it sometimes takes some machining and light fab work but when there is no other option it works! [email protected]
 

·
Registered
Joined
·
546 Posts
k&l has xs1100listed but you will have to ck to see if it covers your machine.. i have been rebuilding some unavailable slide assemblies with diaphragms from k&l as they sell about 10 to 12 different ones which cover a lot of makes and models.. it sometimes takes some machining and light fab work but when there is no other option it works! [email protected]
 

·
Registered
Joined
·
830 Posts
Check out his bio - "Pet cocks ordered waiting to fire up my bike"

Where, exactly does one find Pet Cocks? My wife wants to start a no kill shelter for them.

I still have no idea what they have to do with motorcycles or why this guy ordered them. Honestly, how many Pet Cocks does one need?
 

·
Registered
Joined
·
3,453 Posts
It was my understanding that pet hens won't lay any eggs unless there is a pet cock, but Gurl (who has many years of experience in this arena) tells me otherwise. She did say, however, that a pet cock will keep the pet hens under control, otherwise they get ornery with each other & argue/fight. Sounds like a pet cock is sorta like the pimp of the poultry world.
 
1 - 13 of 13 Posts
Top