Cafe Racer Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hey everyone, I recently bought a Honda CB350 Four Cylinder. It's a 71 (it either is a prototype or show bike for the 72 (when it really was released))

Anyways, the bike is very clean and ran 2 years ago the original owner told me. He parked it because the clutch handle was to hard for him to pull (it is really tight)

So I decided to clean the fluids on it. First the gas then the oil. Probably will do the brakes soon.

Everything went fine except the gas, I have a air lock in the line. I've tried all day to get it loose. FYI it didn't have this problem before I changed the gas.

How do I get the gas flowing?

Any help I would greatly appreciate. Thanks for reading.

Cheers,

SD
 

·
Registered
Joined
·
1,641 Posts
[ran 2 years ago the original owner told me]
never trust the previous owner.

[Everything went fine except the gas]
so the oil change was a success

[it didn't have this problem before I changed the gas.]
so put the old gas back in

so are you saying that you removed the gas line and no gas flows out? does gas come out of the tank??
the petcock did you check it,
 

·
Registered
Joined
·
2,740 Posts
Petcock is more than likely clogged with some really nasty gunk. Pull it apart and clean out the little screen in it.
 
1 - 3 of 3 Posts
Top