bellypans
1 - 20 of 25 Posts
Joined
·
2,938 Posts
tannermatic!!!
(sorry, I always have to do that)
yup, THE best stuff.
BORN TO LURK, FORCED TO WORK.
www.NYCvinMoto.com
www.VinMoto.org
(sorry, I always have to do that)
yup, THE best stuff.
BORN TO LURK, FORCED TO WORK.
www.NYCvinMoto.com
www.VinMoto.org
Tannermatic just had his second child, not really sure if he's doing these any more.
If you are Matt speak up. Otherwise Buff Harsh is selling belly pans at Todd Henning Racing. Do a search for them. Same high quality belly pan.
But first choice for the best would be Tannermatic. Light, strong, high quality body work for racers.
Craig
If you are Matt speak up. Otherwise Buff Harsh is selling belly pans at Todd Henning Racing. Do a search for them. Same high quality belly pan.
But first choice for the best would be Tannermatic. Light, strong, high quality body work for racers.
Craig
Another alternative;
I just bought a bellypan from thois gentleman. Quick turnaround and good quality. Not nearly as light at Tannnermatics though.
Contact [email protected]
It is a universal pan that will fit almost any bike with a width of 12" or less (frame lowers or engine). It is all fiberglass. There may be need for some slight trimming but not much if any for the SV (for exhaust clearance and such). Fiberglass holds up to heat very well. If it does touch the pipe it will only rub off the paint from vibration. It is a hand made pan and isn't as pretty as a factory fairing but I try my best. with a powder coating and good paint job it might be close. If you have any questions and want to talk rather than type, call 334-396-0085. If you want one shipped to you send $65 (pan and shipping) to:
Will Harding
6805 Willowick Rd
Montgomery, AL 36116
Jeff
I just bought a bellypan from thois gentleman. Quick turnaround and good quality. Not nearly as light at Tannnermatics though.
Contact [email protected]
It is a universal pan that will fit almost any bike with a width of 12" or less (frame lowers or engine). It is all fiberglass. There may be need for some slight trimming but not much if any for the SV (for exhaust clearance and such). Fiberglass holds up to heat very well. If it does touch the pipe it will only rub off the paint from vibration. It is a hand made pan and isn't as pretty as a factory fairing but I try my best. with a powder coating and good paint job it might be close. If you have any questions and want to talk rather than type, call 334-396-0085. If you want one shipped to you send $65 (pan and shipping) to:
Will Harding
6805 Willowick Rd
Montgomery, AL 36116
Jeff
Joined
·
3,551 Posts
screw you guys
all of buff's stuff is my stuff. Mr chicago can buy one from buff at the thr website.
you all ready to party sunday night in the red roof inn parking lot? I am in. where are we sleeping? we should all crash in rosko's room.
matt bellypan tanner
btw my/ buff belly pans are designed to fit cb 350 and 450 frames perfectly. everyone elses are shite!!!!!
latered
all of buff's stuff is my stuff. Mr chicago can buy one from buff at the thr website.
you all ready to party sunday night in the red roof inn parking lot? I am in. where are we sleeping? we should all crash in rosko's room.
matt bellypan tanner
btw my/ buff belly pans are designed to fit cb 350 and 450 frames perfectly. everyone elses are shite!!!!!
latered
Joined
·
29 Posts
I bought one from WERA Racer Will Terri. He didn't fool around and shipped in three days.
[email protected]
It was well built, light and I was very pleased
Wally
[email protected]
It was well built, light and I was very pleased
Wally
hey matt, i gave bucky sexton your contact info. hes looking for a tank for a 350. hes an old uscra guy and wera racer. and, bmw officianado. parts/service manager at bobs bmw.
hows things goin?
i think buff is over at spa racing. you know, france.
jc
aaron sent my wheel!
hows things goin?
i think buff is over at spa racing. you know, france.
jc
aaron sent my wheel!
Joined
·
2,938 Posts
See you there fools, I'll be sleeping UNDER a Tannermatic bellypan in the parking lot of the red roof inn.
BORN TO LURK, FORCED TO WORK.
www.NYCvinMoto.com
www.VinMoto.org
BORN TO LURK, FORCED TO WORK.
www.NYCvinMoto.com
www.VinMoto.org
>>>>>Just a question for all you guys that are planning on sleeping in the parking lot at the red roof. Why don't you just stay at the track? Then we can have a bigger party in one place.<<<<<
I think they afraid to hang out with us really cool FAST guys!!
JS
I think they afraid to hang out with us really cool FAST guys!!
JS
1 - 20 of 25 Posts
