Cafe Racer Forum banner

Bike Setups per track

1089 Views 8 Replies 6 Participants Last post by  texmawby
It sounds like you guys have all been around for a while and definitely know your shit (which I admittedly do NOT).. could anyone give me some hints on what they have found to be good bike setups for the different tracks up “here”.. Beaver,VIR,NHIS for front and rear sprocket’s. I have read things about VIR like “have an extra book to read…” Keep in mind the only bike I have raced, as is, is the 350F that I think everyone on this board has raced at one time or another and that is at NHIS.
You humble newbie…

J "not that" D
1 - 1 of 9 Posts
j to the d,

16t counter and 36t rear is stock, that will be o.k. if that's what you got. however i would drop a tooth or two on the rear for more drive once on the straightaway (it's really long).

joe c. - your thoughts?

1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.