Cafe Racer Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
90 Posts
Can I use Stock CBR clipons, on a cl350, a clipons pretty universal?
Sure why not, just wrap about 20mm of electrical tape around the forks (A roll a side should do it) and the CBR clipons will fit just fine, as a bonus they'll be nicely dampened and you wont feel any vibes through them, steering responsivness may by a little mushy though...................













If it was a serious question, then I feel obliged to add DON'T do the above, just a little concerned that if you had to ask you might try it.
 

·
Registered
Joined
·
2,087 Posts
yeah about 12-20mm depending on model and year. I don't think CBR reflects a single model but more like 100 different year and model combos.
 

·
Registered
Joined
·
477 Posts
Yes, you can...but will need to have an appropriate spacer machined to take up the difference in fork tube diameter. Having said that, unless you have access to a lathe and can do the work yourself, you would be better off just buying something that will actually fit without all the extra time and expense.
 
1 - 6 of 6 Posts
Top