CB350 Dual Disc For Dummys?

15768 Views 49 Replies 13 Participants Last post by Classic250, 7 mo ago

RJB

Discussion Starter · Sep 22, 2011

I have searched here and many other places for a how to guide to putting a dual disc setup on a cb350, but I have had no luck. I know this is probably a fairly common upgrade for these bikes but I have no idea exactly what the process is or what parts are required. Most of the posts I have read say you can use cb550 triple trees/forks? but since they didn't come with dual discs I still don't understand how they work.

Can anyone lay it out for me? Go ahead and assume I'm a dumbass (I'm sure you will anyway). Or point me to a post where my question has already been answered.

Thanks!

Save

1 - 1 of 50 Posts

Cafel'range

· #48 · 7 mo ago

RJB said:
I have searched here and many other places for a how to guide to putting a dual disc setup on a cb350, but I have had no luck. I know this is probably a fairly common upgrade for these bikes but I have no idea exactly what the process is or what parts are required. Most of the posts I have read say you can use cb550 triple trees/forks? but since they didn't come with dual discs I still don't understand how they work.

Can anyone lay it out for me? Go ahead and assume I'm a dumbass (I'm sure you will anyway). Or point me to a post where my question has already been answered.

Thanks!

Were you able to find a solution?
I'm Sure the Rotors could be cut/lightened so with the aluminum rim, titanium spokes and axle might just even out ?
Looking for a mild cam upgrade, valves/springs/keepers if anyone has a source

Save

1 - 1 of 50 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month