Cafe Racer Forum banner

CB350 Shifting Troubles

2570 Views 6 Replies 5 Participants Last post by  snorkelfork
Just got my engine reassembled and I tried shifting it through the gears but no luck. Seems like it won't even attempt to get into gear. The engine was broke down to the very last piece so I'm thinking one of the gear arms didn't get to the right place. Anybody else had this problem or is there a way to adjust it. The motor turns freely and I took the motor apart in neutral and put it back together in neutral.
1 - 1 of 7 Posts
The good thing is you can take the bottom case off to access the transmission without pulling the head like the manual tells you to do. And you do have a manual for this?

1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.