Cafe Racer Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
8,388 Posts
Sounds like the easist route is to get another engine.

Or you could find a decent cylinder and a new cam chain. You might be able to reuse the pistons & rings if you can get them unstuck without too much force. You're just looking for a runner, right?

2x4 on top of the piston, smack it with a hammer after letting the piston soak a little more. If you can find a stock bore cylinder, you might be able to just bolt it all back up and run it. And make sure to take the oil spinner filter apart and clean it out before running it. And after.
 
1 - 1 of 1 Posts
Top