[De22]

DOT in both Canada and USA agree very close on turn signal lens size and physical location on the bike for safety reasons plus cops are not stupid about federal motorcycle DOT law regarding signal lighting requirements.
"
Each turn signal lamp on a motorcycle shall have an effective projected luminous lens area of not less than 2,258 mm2 (3.5 square inches).
"
&
"
Front Turn signals:
At or near the front, at the same height, symmetrically about the vertical centerline, and having a minimum horizontal separation distance (centerline of lamps) of 16 inches. Minimum edge to edge separation distance between a turn signal lamp and headlamp is 4 inches.
Rear Turn signals:
At or near the rear, at the same height, symmetrically about the vertical centerline, and having a minimum horizontal separation distance (centerline to centerline of lamps) of 9 inches.
"

Blinkers aren't required in Texas, USA.....