Cafe Racer Forum banner
1 - 1 of 1 Posts

·
Banned
Joined
·
5,783 Posts
Welcome aboard,
Now fill out your profile. It helps. In order to get the screws out of the points cover use an impact driver. If you don't have one you can try getting a proper fitting #2 phillips screw driver and smack it in the screw head a couple of times with a hammer. Steel screws in aluminum cases always oxidize in place with time. Smacking the screw head or screw driver with a hammer will break the bond between the steel and aluminum and allow the screw to back out. It is wort it to make sure that youry this witha good screw driver. The screws are soft and will strip out the head if you are not careful.

Ken
 
1 - 1 of 1 Posts
Top