Cafe Racer Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
1 Can someone confirm for me that the fork tube Dia.on a CB360 are 33mm? I am plan on putting clip ons on it. That the reason I ask.

2 Will the top triple clamp for a CB350 fit on the 360? I was going to replace my original one with one made without the bar priches holes.

Thank you for any information!


Chris,
 

·
Registered
Joined
·
3,453 Posts
cb360 tubes are 33mm. cb350 top clamp from '73 disc brake model will fit, but it's the same as the one from your cb360. In fact, the whole front end is the same.
Older cb350 top clamps will not swap with cb360. You could, however, swap the entire front end, but why? The weakest link in a cb350 is the fork setup.
 

·
Registered
Joined
·
3,453 Posts
cb360 tubes are 33mm. cb350 top clamp from '73 disc brake model will fit, but it's the same as the one from your cb360. In fact, the whole front end is the same.
Older cb350 top clamps will not swap with cb360. You could, however, swap the entire front end, but why? The weakest link in a cb350 is the fork setup.
 
1 - 3 of 3 Posts
Top