Cafe Racer Forum banner

custom cafe parts from Canada

1359 Views 8 Replies 4 Participants Last post by  tonupjay79

First off let me say that it so rad to see at ton of people keeping classic biking alive!

If anyone is interested in getting some parts machined for their cafe/custom application please let me know. I am hoping to have my bike put on soon so that you can see my work.

I can work in aluminum and stainless and have made some bodywork out of fiberglass as well. I can produce items like rearsets, handlebars (clipons), triple clamps, signal lights and pretty much anything you can dream up.

Please note I am simply a machinist and designer that likes bikes and cutting metal. I am not trying to get rich from doing this so feel free to e-mail me or respond to this message with any questions or comments as I would love to start making any parts anyone needs for their cafes.

Crack it

1 - 4 of 9 Posts

At present I do not personally do any CNC machining as I don't have a CNC machining center at my disposal. However, I do have a local machine shop that I deal with that has very good cnc rates, $75 CAD/hour compared to the normal $100 - $125 CAD that you would normally pay. I also have some waterjet companies that I deal with that work well if the cad data is simply a 2d profile.

If you'd like, you can send me the data and we can go from there, I can accept data in most 2d or 3d formats (I use solidworks for design software). e-mail me at [email protected] if you'd like to look into this a little further.

best Regards


I am about 45 minutes northwest of Waterloo, Ontario

Crack it


That's quite the bike! It's gonna look great when it's done! I think the black concept picture is rad!

Crack It

1 - 4 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.