Cafe Racer Forum banner

DAMMIT Tarnation!!!!

2390 Views 22 Replies 9 Participants Last post by  8ball
Parked the bike on the lift after a ride on Tuesday.
105085
Went back to the garage on Wednesday to tweak the bike for a Thursday ride, and find the bike laying in its side.. off the lift! The front tire had developed a small leak. When the pressure left the tire, so did the pressure of the wheel clamp, and plop, bike playing dead.
Thankfully, the lift was lowered, so there was almost no damage. Almost! The ONE thing that this bike never needed was paint work. Unfortunately, gas leaking out of the tank ate a good piece of the paint on the tank.

105080

So anyway, I removed the tube and found that some rust had formed on the inside of the rim and had worn a small hole on the inside diameter of the tube.
105081
Cleaned up the rust, applied electrical tape to the inside of the rime, applied a new rim strip and replaced the tube. Hopefully the weather will allow a couple good riding days next week. Sigh.
See less See more
3
1 - 4 of 23 Posts
Damn that sucks. I guess put a few jack stands under the frame and swingarm in the future?

Now I guess you have to have a custom alloy fuel tank made...

And now you have a reason to get some excel rims!
I love that blue on the tank.

Is that the stock petcock? I've always had terrible luck with the stock ones... even after being rebuilt.
  • Like
Reactions: 1
Or when that bolt you're tightening suddenly starts loosening
  • Like
Reactions: 3
that turned out really good....
now the next question, is vinyl fuel resistant?
1 - 4 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top