Cafe Racer Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
353 Posts
Dual -filament bulbs in the signals, one of the filaments is a parking light controlled by the light switch.

Either ignore those filaments/wires or just run them to the parking cicuit from the Ign. switch.

All you need for this to work is the wire marked "W" and the wires marked "R" and "L" on the diagram below.

Ignore the "B" because that's the buzzer and your new switch doesn't have an output for it.
 
1 - 1 of 1 Posts
Top