Cafe Racer Forum banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
11,267 Posts
Ryan,
They have too much fluid in them and are going into hydraulic lock. To get the all the old fluid out you have to remove the drain plugs in the bottom of the forks and let them drain a while with the fork caps off....then bounce on them (the oil will shoot right out of the drains so be careful), when you have all you can get out by draining and bouncing might want to dump some clean kerosene in them, bounce around some more, let them drain, bounce some more, let them drain...then add the advertised amount of new oil.
JohnnyB
 

·
Premium Member
Joined
·
11,267 Posts
Ryan....remember...before you bounce on them....put the fork caps back in !!! Sorry if you don't get this in time :)

JohnnyB
 
1 - 3 of 3 Posts
Top