Cafe Racer Forum banner
1 - 1 of 14 Posts

· Banned
6,272 Posts
Hi Trev,
As far as the seat goes, here is what I did on my race bike. It is a CB350 and Ahrma rules for one of my classes mandates the OEM seat base. I cut the hinge pivots off the frame and unbolted the mates from the seat pan. I then removed the cover and the foam and split the pan down the center lengthwise. Next, I overlapped the 2 seat pan halves until the width matched the frame rails. I pop rivited the pan back together, trimmed the foam to fit and contour and reinstalled the original cover. It was free and really cleans up the look.

Vintage racing - old guys on old bikes
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.