Cafe Racer Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
23,303 Posts
well for starters you don't want a combined exhaust system on a two stroke. It's bad. The buffalos seem to do ok with them but it is still a smaller power band than stock. Ideally one pipe per cylinder.

I can't find it now but there used to be plans on the net for making your own chambers for the gt550. There are people out there (tomcat on the kawi triples board) who will make custom chambers, and I think there is still one mfg that makes them regulary (Jemco in houston, Tx).

Stock pipes are going to be expensive either way you slice it, so you are better off with chambers.

Otherwise you can troll ebay for one of the back in the day 3 into 1 pipes but they don't come up often and will cost more than a new set of 3 into 3s.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top