[jbranson]

It's the front hub from a CB/CL77 and a REAR backing plate from CB/CL77.

The large stay lug on the backing plate identifies it as a rear part (the early 305 "dreams" front brakes that had such a lug were single leading shoe). The lack of sprocket mount identifies the hub as a front hub....it's a mismatched set I think.
JohnnyB

PS. Also note that the main brake arm is shorter than it should be for a front brake. The CB/CL77...had different length main brake arms on the front and rear...with the front being about 10mm longer than the rear. Longer front style arm is seen here:


http://www.jrbranson.com/showandtell.htm

Second photo down...right hand side.

Edited by - jbranson on Apr 18 2007 3:29:02 PM

 

[jbranson]

McMaster has 10mm x 1.5 jam nuts. If by jam nuts you mean thin nuts. These are 5mm thick...which would be about half the height of regular 10mm nuts.
JohnnyB

 

[jbranson]

If you need that stuff...I've usually got a few in stock. I don't sell the junkers though, only race prepped stuff.
JohnnyB