Cafe Racer Forum banner

idling on one cylinder

5K views 44 replies 11 participants last post by  Johnny Gaijin 
If after doing everything parks61 says, it still won't idle then check that the idle speed screw isn't backed all the way out. You need the butter fly open just a little for them to idle. I'd check it before doing what parks61 said but you could do it after too, you'll learn a lot about taking the carbs apart if you do it that way.

Mike O.
 
If after doing everything parks61 says, it still won't idle then check that the idle speed screw isn't backed all the way out. You need the butter fly open just a little for them to idle. I'd check it before doing what parks61 said but you could do it after too, you'll learn a lot about taking the carbs apart if you do it that way.

Mike O.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top