Cafe Racer Forum banner

Micro Controller Techno Geek needed

2440 Views 27 Replies 9 Participants Last post by  jbranson
Anyone here have decent experience programming and interfacing devices with Microcontrollers such as the "basic stamp"?

I've just got a little prototyping/programing board with a basicstamp...looking for someone with lots of experience playing with them. Seems fairly straightforward so far...just modified Basic Language. I'm going to eventually need help with the I/O. I'm looking to build a programable CDI ignition based on these chips or similar.
Besides not wanting to spend $1000+ on a store bought unit...most of them I've seen would not be suitable for my application anyway.

I want to intercept the trigger signal of the CDI unit that dumps the capacitor to the coil and delay it based on a rpm map.
JohnnyB
1 - 3 of 28 Posts
This one should be cake.. after all it is the old..

Intercept the trigger signal of the CDI unit that dumps the capacitor to the coil and delay it based on a rpm map.


Has anyone seen my flux capacitor ?

http://d0server1.fnal.gov/users/utes/webpage/doc.jpg

Notice the Johnny B resemblance ?

J "not that" D
I'm fscking stunned... Johnny I'm glad your on our side...

J "not that" D
1 - 3 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top