Cafe Racer Forum banner

Micro Controller Techno Geek needed

2438 Views 27 Replies 9 Participants Last post by  jbranson
Anyone here have decent experience programming and interfacing devices with Microcontrollers such as the "basic stamp"?

I've just got a little prototyping/programing board with a basicstamp...looking for someone with lots of experience playing with them. Seems fairly straightforward so far...just modified Basic Language. I'm going to eventually need help with the I/O. I'm looking to build a programable CDI ignition based on these chips or similar.
Besides not wanting to spend $1000+ on a store bought unit...most of them I've seen would not be suitable for my application anyway.

I want to intercept the trigger signal of the CDI unit that dumps the capacitor to the coil and delay it based on a rpm map.
1 - 1 of 28 Posts
NOW.....thats the Branson I know!!!

1 - 1 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.