Cafe Racer Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,731 Posts
Borzwazie,

Measure the engine side of the carb with a digital vernier caliper. If it's a 34 it will actually be slightly larger than 34mm at the very edge - usually 34.45mm or so. 33's and 32's will be the same way - slightly larger at the very edge of the engine side of the carb.

I'm looking for a set of 34's for a T500 and I have a set of clean 32's to trade if you get these and they are too big....

Let me know if you are interested...

Jim
 
1 - 1 of 1 Posts
Top