Cafe Racer Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
23,303 Posts
Ok - ditch old stock signals. Ditch the stock headlight ears if you want also. Remove the headlight bolts, and use the signal stalks to mount the headlight to the ears. viola, clean and tidy.

For the rear, when you remove the signals from the sissy bar there should be a plate with a hole in it. Just use the hole to mount your new signals. If you want to ditch the sissy bar (which I think is a pretty good idea), find the end of the frame rails in the back of the bike, there is usually a hole where a bolt goes to mount the rear fender. Remove the bolt and use that hole to mount your signals.
 
1 - 1 of 1 Posts
Top