Cafe Racer Forum banner
1 - 20 of 29 Posts

· Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Hey guys I've been a casual lurker on occasion around here and decided to join the forum finally. I'm in San Angelo,Tx. but originally from the S.F.Bay Area where I started riding bikes about 17yrs. ago on a 1972 CB450 cafe racer. I've had several bikes since and my current roster is a 74' CB750 Dunstall-Honda cafe racer, a 72 CB100 cafe racer built for my wife, and a 70' BSA B25 Starfire cafe racer / race bike. My daily rider is the CB750 with these specs:

1974 Dunstall-Honda CB750/F

Dunstall 5gallon race tank
Dunstall 35mm Clip-on bars
Aluminum race foot pegs
Magura dual front disc brakes
Daytona fork brace
Stainless steel mini tach / speedo
Custom race seat / upholstery by Robert Wells
Uni air filter pods
DYNA electronic ignition
Finned engine covers kit
Finned oil cooler plug
K&N oil filter
NGK plugs
GL1000 rear shocks w/ dual rate springs
MAC style 4:1 headers w/ UN=baffled aluminum race can
Comstar wheelset
Custom paint job in BMW pewter grey&black by Robert
Wells
Vincent style tank emblems by Steve Carpy

Future add ons in progress:

Vipex rear shocks w/ remote reservoir
Drilled out front brake rotors w/ steel braided lines
Braided steel oil supply lines
Polished aluminum Velocity stacks
Mikuni Carbs


I wish I could post some pics for ya right now but I'm at work right now and I can't access my Photobucket.com account because it's blocked. Best I can do for now is give ya this address for my clubs website which has a gallery with some of my bikes pics in it www.myspace.com/vintagerockersmc

I ride with the VRMC (club founder), 59 Club Texas - DFW, and Tun Up Club Texas.

Wouldn't mind meeting up with any Texas people out there, hell some of ya might even already know me from some of the vintage bike, Brit bike rallys.

Peace & Grease

Rob - WestTeaxsRocker
 

· Registered
Joined
·
18 Posts
Discussion Starter · #12 ·
It's a Paul Dunstall racing tank made for racing the IOM TT. Here's a couple others...

My BSA Starfire B25 cafe/track bike project - almost complete.




My wifes CB100 cafe , still being modified.






I also have one more project that I'll hopefully start in a couple months on a 72' CB125 that will be race prepped for GP125 class as a CR110 replique racer with the Airtech stretched Honda factory works style tank and matching bubble seat w/ TT pipes.
 

· Registered
Joined
·
18 Posts
Discussion Starter · #13 ·
It's a Paul Dunstall racing tank made for racing the IOM TT. Here's a couple others...

My BSA Starfire B25 cafe/track bike project - almost complete.




My wifes CB100 cafe , still being modified.






I also have one more project that I'll hopefully start in a couple months on a 72' CB125 that will be race prepped for GP125 class as a CR110 replique racer with the Airtech stretched Honda factory works style tank and matching bubble seat w/ TT pipes.
 

· Registered
Joined
·
26,142 Posts
I have a dunstall cb750s tank also, but the knee indents look different in your pic than in mine, it is why I asked (and they weren't just made for racing the IOM TT, most were made for street bikes - way to name drop though)

This is mine and you can see the difference:



Nice touch on the Drum comstar on that silver bike, a cb750 DOHC custom rear wheel, right?
 

· Registered
Joined
·
26,142 Posts
I have a dunstall cb750s tank also, but the knee indents look different in your pic than in mine, it is why I asked (and they weren't just made for racing the IOM TT, most were made for street bikes - way to name drop though)

This is mine and you can see the difference:



Nice touch on the Drum comstar on that silver bike, a cb750 DOHC custom rear wheel, right?
 
1 - 20 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top