Cafe Racer Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
26,142 Posts
got any kawi triple parts?

AS far as what fits, my new kick is to grab those pacesetter monza car exhaust tips (dual outlet) because they actually have baffles and packing in them and most speed shops carry reducers to fit them to motorcycle pipes.
 

· Registered
Joined
·
26,142 Posts
quote:
Hey Geeto, I remember you suggesting throwing Monza tips on my exhaust last season...

Did you ever do it yourself? Or get a Pic?

Hey By'
I bought the tip and the reducer to fit it, but I have to drop the exhaust to do some motor work on the bike it is going on so I have not tested it. I might put it all back together this weekend and If I do I'll snap a pic (it is hard for me to take pics of anything).
 

· Registered
Joined
·
26,142 Posts
quote:
which parts do you need for what triples? have lots of oem kawi gaskets, cables, hard parts, etc. not too many pistons but if you know what sizes you need might have them, too. and if a TZ125 is the same as a TA125, no clutch plates but will do more research. if you can give dimensions maybe there's a full set of Vesrah plates here someplace.

wrench
for my 76 KH500 I need a throttle cable (both pieces), Clutch Cable, choke cable, oil pump gasket, and an oil injection pump if you have one lying around.

e-mail me at [email protected] to let me know if you have parts and prices.
 

· Registered
Joined
·
26,142 Posts
quote:
do the singles have packing and baffles in them? and has anyone sl;apped these on a cb450 before? the pacesetters i mean......
The singles have baffels and packing in them too, but less than the doubles. I went with the doubles to get as much sound deadening as I could since they are basically straight throughs like cherry bombs but not as long. The one cool thing that helps them is that I remember these on cars in the 80's and the baffels are designed to "tune" the sound so it sounds like a ferrari which takes some of the edge off of straight pipes. I don't imagine that they are neighbor friendly but they are better than drags.
 

· Registered
Joined
·
26,142 Posts
quote:
Thanks, Jack. Always nice to hear something positive! Hope the sand gets off the roads soon.

wrench
pete, any word on those parts I asked about:

for my 76 KH500 I need a throttle cable (both pieces), Clutch Cable, choke cable, oil pump gasket, and an oil injection pump if you have one lying around.

e-mail me at [email protected] to let me know if you have parts and prices.
 

· Registered
Joined
·
26,142 Posts
quote:
Hey Geeto! Tried to e-mail you at the address you gave but I'm guessing it didn't work. Anyway, I have the throttle and choke cables but not the rest of the parts. Would a different oil pump from a single work? Also, the clutch cable is available thru parts unlimited (I can get it for you, too). Throttle cable is $40 (56 retail) and the choke cable is $20 (25 retail). Don't forget the sales tax (8 per cent) and shipping is about 8 or 9 bucks. Let me know if you want 'em.

E-mail to [email protected]


wrench
got the e-mail just spaced on sending a reply. I want them e-mail me where to sent the money. The single oil pumps won't work - I think I have a line on a good used one, I was just hoping for new.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top