Cafe Racer Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
201 Posts
Discussion Starter · #1 ·
my petcock on the 750 tank is almost touching one of the heads. The fuel lines touch one of the heads right where they come from the cock. I'm afraid this will cause some over heating of the fuel, boiling, vapor locking, or melting my lines. can anyone help. if it doesn't touch am I ok. has anyone had this problem before when swaping tank.. I really don't want to cut and relocate if at all possible. I will get a pic on here quickly.

carpe diem.... seize the carp
 

·
Registered
Joined
·
201 Posts
Discussion Starter · #3 ·
yeah that's kinda what I'm thinking. I just didn't know if I could get some kind of hard line or there was a smaller petcock that would work on a 750 tank. I guess I could cut that small cock off my 360 tank and weld it up on the 750 tank. the 750 cock is on the wrong side anyway.

carpe diem.... seize the carp
 

·
Registered
Joined
·
201 Posts
Discussion Starter · #6 ·
geeto- I'm SOL I have the threaded one with a good cock, but it's on my 360 tank. my 750 is the stupid one with two bolts. but what I'm thinking is cut off the one from the 360 and drill, a hole and weld it to my 750. and the just weld a plate over the 750 petcock hole.. it would be a snap I think. then it would be on the right side and I don't have to buy anything, I have it all already!

carpe diem.... seize the carp
 

·
Registered
Joined
·
201 Posts
Discussion Starter · #8 ·
yeah but I got a good deal on this one and It will only take me an hour or two to do it. and I can place it exactly where I want. the 750 is on the wrong side too... it's not big deal, but it would just be easier if I put it on the left side.. and no I might not bang it out after all..

carpe diem.... seize the carp
 

·
Registered
Joined
·
201 Posts
Discussion Starter · #9 ·
hey geeto can I get a piece of steel pipe from the hardware store and weld that up, if the threads are metric? then I wouldn't have to cut up a good tank

carpe diem.... seize the carp
 
1 - 5 of 5 Posts
Top