Cafe Racer Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
7,125 Posts
here's the poop. Don't try to knock it off with a drift. You can try to make one with a big socket, just grind it to fit. Or, you can buy one, they are usually on Ebay. I was also told that they are available from any Honda dealer. It's the only way to get the thing off. Put a penny between the gears to keep it all from moving after you get the tool on it. (Make sure you knock the toothed washer back too.)

If you look in some of the bigger motorcycle supply houses catalogs, they also carry it. Look in the tools section

Or email me off line and I'll let you borrow mine. As long as I get it back.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top