Cafe Racer Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
10,824 Posts
Discussion Starter · #1 ·
the clutch on my 70 CB125 left early for christmas....

ok so i pulled the side cover off of the motor and see the clutch on my left but cant pull it off because there is a "bulb" on what i think is the crank on the right. the "bulb" hangs over the clutch. how do i remove the "bulb"? and what is it?
thanks

There is the right way, the wrong way and the british way to do anything!
 

·
Registered
Joined
·
10,824 Posts
Discussion Starter · #4 ·
ok i the manual. it says that my 'bulb" is the oil filter. and i need a 16mm t-handled box wrench to get it off...
then the clutch should slide out. i dont have the tool. it looks like a normal socket but with 4 teeth at the bottom. is there some where that i can get that tool or make it in some way?

There is the right way, the wrong way and the british way to do anything!
 

·
Registered
Joined
·
10,824 Posts
Discussion Starter · #5 ·
i would post a pic but im not really sure how...


There is the right way, the wrong way and the british way to do anything!
 

·
Registered
Joined
·
10,824 Posts
Discussion Starter · #10 ·
yes i o have to take the "filter" off. the tool from motion pro says its 23mm and the one in the manual says that its 16mm.....
ill try to make one up and see if that works


There is the right way, the wrong way and the british way to do anything!
 

·
Registered
Joined
·
10,824 Posts
Discussion Starter · #11 ·
yes i o have to take the "filter" off. the tool from motion pro says its 23mm and the one in the manual says that its 16mm.....
ill try to make one up and see if that works


There is the right way, the wrong way and the british way to do anything!
 

·
Registered
Joined
·
10,824 Posts
Discussion Starter · #16 ·
im gunna see if the 23mm fits and just buy one. once the oil "filter" is off the clutch basket should just slide off...right?


There is the right way, the wrong way and the british way to do anything!
 

·
Registered
Joined
·
10,824 Posts
Discussion Starter · #18 ·
funny how the manual says 16mm though....guess that its not always right and it does pay to ask what might seem like a dumb question.
thanks for everyone that had something to say that helped.

There is the right way, the wrong way and the british way to do anything!
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top