Cafe Racer Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
239 Posts
Discussion Starter #1
I am trying to remove the original exhaust off of my 75'CB750. The first pipe came off very easily but the second is stuck. I have loosened the collar and removed all other bolts. It will wiggle back and forth a very little bit but will not budge.

Does anyone have any tricks before i really start pounding on it to get it off. I do not plan to reuse the pipes because they are in very bad shape.

Thanks.
 

·
Registered
Joined
·
23,303 Posts
K or F bike?

The K has to flush mount screws, the F has studs with nuts.

If it is a K soak it in PB Blaster for a day and then go get an impact driver (big screwdriver that you hit with a hammer and it breaks screws loose).

If an F, soak in pb blaster for a day (and I mean soak) and attack with a breaker bar.

if it is a K and you don't want to change the spigots, the exhaust should come off after you loosen the collars (all of them). Soak any bolts with pb blaster and go to town.
 
1 - 2 of 2 Posts
Top