Cafe Racer Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter · #1 ·
Anyone know how this is done? I checked the one on my bike and it has some weird kind of pin that doesnt look like it can be reused once removed. Here is what my cap looks like.

 

·
Registered
Joined
·
134 Posts
Discussion Starter · #3 ·
quote:
the cap should be the same for most honda models (looks the same as my 750, but I know the 175 and 350s have a different one). If it is the cap is rivited on and you will need to drill out the old rivit and replace with a new rivet. I think the rivit is still available from honda, but I would make sure you have one before you start to destroy the old one.
Thats what I was afraid of. Could I just use any old rivot, does it have to be from Honda?
 

·
Registered
Joined
·
134 Posts
Discussion Starter · #6 ·
Weird thing is is that I just checked my new OEM cap, and the rivet is already in the cap. I dont get it at all. Im going to have to break this one off to install it. Seems weird.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top