Cafe Racer Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
I am doing a cb 350 and was wondering if there is a universal or other model throttle that would work on my new clubman bars? I dont have any throttle/cables (not there when I bought this basket case). I got a push button kill switch, and now I just need to put a twist throttle on it. .thanks

napalm. . . it sticks to kidz.
 

·
Registered
Joined
·
5,778 Posts
Go_around,
A dirt bike type throttle will work fine. You may need to adjust the throttle cable length to work. You will then need to get a front brake lever assembly to replace the one that was part of the throttle assembly. I used a throttle and lever assembly from Dennis Kirk.
Ken

AHRMA 412
Vintage racing - old guys on old bikes
 

·
Registered
Joined
·
8 Posts
Discussion Starter #3
do I need a push or a pull? Can I use a stock cb350 2 into 1 cable with an aftermarket, or throttle from another bike? ?

napalm. . . it sticks to kidz.
 

·
Registered
Joined
·
5,778 Posts
The stock cable should work ok. If you have tthe disc brake front end then you will be ok with the stock master cylinder too.
Ken

AHRMA 412
Vintage racing - old guys on old bikes
 
1 - 4 of 4 Posts
Top