Cafe Racer Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I am looking for a set (or at least the right hand side)of carbs for my 73 CB350 twin. If it matters, it is the K5 I believe (front disk). The choke plate and accelerator plate were cracked when I picked up the thing. I tried getting a set of junk carbs off ebay and putting the plate in, but then reallized that those are machined to fit or something. The one carb will not close all the way making an idle around 2K rpm (not real good). These can need a rebuild, but I cannot afford a whole lot. Thanks for any help.
John

1973 CB350G or K5
1983 GPZ750
 

· Registered
Joined
·
11,783 Posts
john, where are you?? i have alot of spare parts. i can send you some junk with good choke and throtle plates if youd like. they should all be universal. ive never had a problem with parts not fitting from one to another. and if they were cracked, id look at them really closely. theres a reason internal parts like that broke. i dont have anything all togther that would bolt right up, but i have anout parts to build some. let me know if you want some pices to try again.




jc
 

· Registered
Joined
·
6 Posts
Discussion Starter · #3 ·
Joe, thanks for the offer. I read somewhere that you were not supposed to interchange the plates because they wouldn't fit right. Maybe I should just pull the carbs and see if I can readjust the offending plate so it will close all the way. If that doesn't work, I will let you know. By the way I am up in Wisconsin.

1973 CB350G or K5
1983 GPZ750
 

· Registered
Joined
·
11,783 Posts
they grew back.....

im all used up with carbs. sorry. my collection has been gone through like a cheap crack whore. i was just looking at what i have left now, and i might as well just throw the box out.

jc
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top